|
CODE |
PF30L / PF50L / PF90L |
|
TRADE PRICE |
£299, £314, £356 |
|
POWER |
3.0kW |
|
TYPICAL APPLICATION |
Ideal for a wide range of commercial applications, cafes, canteens, small industrial units and light domestic situations dependent on unit size. Can supply up to 6 basins depending on unit size and simultaneous usage, 90L unit can supply 1 bed/ 1 shower/ 1 bath. |
|
TECHNICAL DATASHEET |
Download PDF |
|
POWERFLOW (PF30L / PF50L / PF90L)
The NEW Powerflow unvented multipoint water heater is a high performance mains pressure unit which can be used for many applications. It is the ideal solution for light industrial, commercial and light domestic hot water requirements.
The Powerflow can be sited at any convenient location above or below the outlets to be served. An unvented accessory kit is suppplied with every unit which contains all you need for installation.
Features:
The Powerflow features:
- Stainless steel tank - 3 year tank warranty
- Multi-sink capability, wall mounted, slimline profile (from 295mm)
- Factory fitted temprature and pressure relief valve - 7 bar 90°C
- Thermostat adjustable to 65°C
- Building Regulations and CE approval
- Uses conventional taps, including mixers
- Highly efficient thermal insulation
- Unvented Accessory kit supplied with every unit
- 1 year warranty on electrical components
| MODEL |
PF30L |
PF50L |
PF90L |
| Maximum water pressure to pressure reducing valve |
12 bar |
| Power (kW) |
3.0 |
| Voltage (V) |
230V~50Hz |
| Current (A) |
13A |
| Capacity (Litres) |
30 |
50 |
90 |
| Operating Pressure |
3 bar |
| Expansion vessel charge pressure |
3 bar |
| Expansion relief valve setting |
6 bar |
| Pressure reducing valve setting |
3 bar |
| Temperature and pressure relief |
7 Bar 90 degrees C |
| Minimum recommended pressure |
0.8 bar |
| Immersion heater specification |
Hyco PFEL30EN60335x 1 |
| Weight empty (kg) |
9 |
13 |
24 |
| Weight full (kg) |
39 |
63 |
114 |
| Heat up time (from 13°C to 60°C) in minutes |
21 |
40 |
86 |
| Reheat time (70% contents to 60°C) in minutes |
16.5 |
28 |
57 |
| Height (mm) |
620 |
915 |
930 |
| Width (mm) |
380 |
380 |
540 |
| Depth (mm) |
295 |
295 |
385 |
| Tank Material |
Stainless steel |
| Inlet / outlet connection |
1/2" BSP male |
SELECTION GUIDE
| APPLICATION |
SUGGESTED PRODUCT |
| 1-2 basins |
SF10K |
| 2-3 basins |
SF15K |
| 3-5 basins |
PF30L |
| 4-6 basins |
PF50L |
| 1/bed/ 1 shower/bath |
PF90L |
*note guidelines are approximate depending on usage - call the sales team for sizing advice.
ACCESSORY KIT
An unvented accessory kit is supplied with every unit. This contains expansion vessel with fixing bracket, inlet group, flexible hose and tundish. The expansion vessel is 5 litres for the PF30L and the PF50L models and 8 litres for the PF90L model.
Related press release:
http://www.hyco.co.uk/news.asp?id=29
Click here to view related product FAQs
Click here to view related product spares
|
